Dredge Pump 2500
For pumping sediment. The feed screw aerates the bottom so that the pump receives an even flow. The pump can also be equipped with a suction funnel which is recommended when the sediment it light and soft. A cutting device at the opening of the suction pump cuts roots and other soft objects. The pump is controlled from a start panel mounted by the driver's seat.
Doro Pump
The Doro Pump is the new addition to our range of pumps designed specifically for the new Truxor DM 5000 running directly from the hydraulic engine. It has a capacity of 10 - 40 m³/h. The pump is mounted on a telescopic arm (sold separately). A rotating wheel with horizontal cutters and vertical teeth aerates the sediment and cuts off roots and soft materials to facilitate feeding of material into the pump. The rotating wheel makes the pump easier to manoeuvre than its predecessor which had a feeding screw at the pump inlet. The feeding is important to providing an even flow of sediment to the pump; also facilitated by the knives positioned at the inlet of the pump.
Sala Roll Pump
Pumps light sediment with a minimum amount of water. The pump works with a strong vacuum and high pressure. This high pressure allows sediment to be transported long distances. The dredging can be carried out without the water becoming discoloured. The dredging pipe is mounted on to the lift arm which can be pressed down into the sediment. Light and soft deposits can be sucked directly from the bottom.
Doro Cutter 3090/3091
The Doro Cutter 3090 is recommended for cutting of normal aquatic vegetation and is usually the obvious choice in most waters. The cutter is operated hydraulically and is easily connected to the Truxor’s equipment bracket. Cutting depth is 1m. The knives are exchangeable and the working breadth may be varied from 2.2 to 4 m. The cutter requires water for lubrication during work and is therefore not suitable for use on land. A stone-triggered system protects it from breaking the knives against solid objects. The Doro Cutter 3091 is the same model of cutter, but has an extended cutting depth of 1.4m Both models are delivered as standard with a knife work width of 4 metres.
Doro Cutter ESM 1700
This cutter is side-mounted on Truxor for cutting along riversides and
channels so that the angle of the cutting unit can be adjusted. The knives are a Busati model which means that the cutter does not need water for lubrication when working. Doro Cutter ESM 1700 is equipped with an automatic stone-triggered solution which protects the cutter when motion is stopped due to solid objects. The cutter has a work width of 1.7 m and a cutting depth of 0.5 m. It has good capacity and the Doro Cutter ESM 1700 cuts thick reeds and plant growth without problems.
Doro Cutter ESM 2100
For the cutting of reed and larger aquatic plants found in the margins and along river banks. The Doro Cutter ESM 2100 is a front attached cutter with Busati model double action knives which means that the cutter does not need water as a lubricant when working. The knives do not require water for lubrication and are suitable for use in shallow water and in marshlands. The Doro Cutter ESM 2100 has good capacity and can also be used for thick reeds. Work width 2.1 m and cutting depth 0.5m.
Doro Cutter ESM 2200
Doro Cutter ESM 2200 cuts and gathers at the same time making it the ideal tool for working in marinas and small streams where water is constantly moving. If only the cutting function is required the collection basket can be easily removed. Doro Cutter ESM 2200 has a work width of 2.1 m and a cutting depth of approximately 0.8 min water. The knives are a Busati double-action model which means that the cutter does not require water for lubrication while working.
Reed rake, standard
With collapsible side sections, the Standard Rake is used for gathering and transporting plants after reed cutting. The rake can be complemented with strainer plates for gathering of refuse, algae and absorbers (oil decontamination).
Working width 2 m or 3.5 m.
Rake, with springing pegs
When the waterside is uneven, the material can be raked into the water using this attachment and then collected using the standard rake.
Work width 2.5 m
Weight 30 kg
Rake, high tipping
This rake has a high tipping height which facilitates loading onto e.g. trailers or barges. The rake is made of perforated steel plating and can gather smaller particles such as litter, algae and absorbers (oil decontamination).
Work width 2.13 m
Weight 68 kg
Max. lift height in water 1.3 m
Max. lift height on land 1.7 m
Strain Plates
Collection is just as important as cutting. Cut water plants left in the water act as a fertiliser. We therefore recommend that cut plants always be collected and removed. By gathering water plants and picking them up, you also help to remove part of the "over-fertilisation" from the lake. For those using their reed cutter in different type of water, we usually recommend cleaning the machine between moves in order to prevent spreading undesired water plants to new water systems.
Lifting Rake
The strong construction and heavy duty forks make it an excellent tool for lifting heavier objects such as tree branches, rocks and debris from waterways, canals and beaches.
Work width: 1.2 m
Weight: 36 kg
Excavator
The excavator can be mounted on either of the Truxor models. The unit becomes a floating excavator offering unique possibilities. Ideal for clearing inlets and around sluice gates, digging channels and even cable laying. The excavator is operated from the drivers position with the two
lever operating consul connected to a central adjustable bracket. The amphibious nature of the Truxor allows excavation work to be carried out in areas inaccessible to conventional equipment.
Grip bucket and log grab
The grip bucket is used for the removal of silt and submerged objects from canal bottoms or lakes. Using the telescopic arm gives a working depth of 1.7 m. For surface work the standard bracket is used for the bucket or log grab giving a greater lifting power without the telescopic arm.
Cultivator
The Doro Miller is used as a restoration miller for wetlands, beaches and lake bottoms. The miller is available in different work widths; they are exchangeable and can be dismounted from the operating unit. The operating unit is mounted on the lifting arm. When water lily roots and other roots are to be removed, a rotary knife is attached using an extension on the lifting arm which gives a work depth of 1.6 m.
Oil Decontamination
The new Truxor 5000 has been designed to accommodate a new range of products for oil spill clean-up.
The Doroskimmer 400 can be used with two types of pump for use with heavy or light oil. The Skimmer is delivered with a brush roller of mixed brush thicknesses which is suitable for decontamination of most type of oils. Combine with Sala or Foilex pumps.
Capacity 0.20 m3/h
The Sala Roll Pump can be used independently for dredging or “vacuuming” oil residue where the skimmer cannot operate.
The Sala Pump is a suitable pump for decontamination operations for thick-flowing or polluted substances in hard-to-reach places. A very strong vacuum gives a high suction capacity. The high pressure transports the substances long stretches. The Sala Roll Pump is used separately with a suction piece or in combination with the Doroskimmer 400.
Foilex is a high capacity pump for use on larger oil spills.
The Foilex is a patented low-speed TDS Pump with "Twin Disc Screw" pump technology with a higher capacity than the conventional screw pump. The inlet has cutting knives and can pump both thick and thin substances. A Foilex pump is mounted on a Doroskimmer 400 and can also be adapted for use separately. Delivered with a 3 m pressure tube Ø 100 mm.
Capacity: 18 m3/h at 6 bar
Doro Tank
Oil decontamination has different prerequisites for different environments. During the final phase of work, there are usually smaller areas with pools of oil where it can be more practical to use a mobile tank.
The Doro Tank has a 200 litre capacity and is mounted between the pontoons and has couplings for simple connection to pumps as well as a connection for emptying the tank. The Doro Tank is used in combination with a Doroskimmer 400.
Trailer LMT 2500
The Trailer LMT 2500 is specifically designed to transport the Truxor. The trailer tip action and ramps allow for easy loading and off loading of the machines. Guide rails are fixed to the bed of the trailer to ensure the Truxor is located centrally and to avoid movement during transportation. The specially designed chassis of highly durable steel and I beams provide a strong, lightweight trailer. Maintenance is minimal due to the design and quality of the materials.
Bed dimensions
500 x 220 cm
Total length 620 cm
Bed height 70 cm
Service weight 630 kg
Total weight 2500 kg
Max. load 1870 kg
For further information about the TRUXOR and its versatile tool options please don't hesitate
to contact AQUACLEAR WATER MANAGEMENT.